For the circuit shown in Figure P2.24, determine which components are supplying power and which are dissipating power. Also determine the amount of power dissipated and supplied.
What will be an ideal response?
Known quantities:
Circuit shown in Figure P2.24.
Find:
Determine power absorbed or power delivered and corresponding amount.
Analysis:
If current direction is out of power source, then power source is supplying, otherwise it is absorbing.
A supplies
B absorbs
C supplies
D supplies , i.e absorbs
E absorbs
You might also like to view...
What fan performance characteristics are shown on a typical fan curve?
A) pressure drop, efficiency, and horsepower B) RPM, tip speed, and horsepower C) sound levels, bearing temperatures, and reluctance D) horsepower, RPM, and reluctance
A small circle is easy to sketch when you sketch it like a letter "O."
Answer the following statement true (T) or false (F)
?
A pre-OBD II vehicle with a return-type fuel injection system is being tested with an exhaust gas analyzer and the following results are obtained (AIR pump disabled): At Idle: At 2500 RPM: CO2 = 8.35 % CO2 = 7.80 % CO = 0.00 % CO = 0.00 % O2 = 0.91 % O2 = 0.85 % HC = 2,150 PPM HC = 2,360 PPM l = 0.930 l = 0.908 Which condition would most likely be responsible for all of the readings shown? A. An open spark plug wire B. A vacuum leak C. A restricted fuel filter D. A leaking fuel pressure regulator diaphragm
ASE-Style Multiple Choice ____ detect a rapid deceleration or g-forces to produce an electrical signal.
A. Arming sensors B. Impact sensors C. Deformation sensors D. Inertia sensors