Sketches are turned into 3D models by ____, a term often used to describe a number of functions, such as extrusion, lofting, revolving, sweeping, and shelling.
A. conventions
B. standards
C. features
D. dimensions
Answer: C
You might also like to view...
The specification for the sizes of ____ are given as the inside diameter.
A. all pipes B. all tubing C. pipes smaller than 12 inches in diameter D. pipes larger than 12 inches in diameter
Why are slotted-head screws usually installed manually using a flat-blade screwdriver?
A) It is not possible to make flat-blade screwdriver tips for drills. B) The buildup of high static electricity charges can cause dangerous arcs. C) It is very difficult to keep the bit aligned in the slot with a drill. D) Federal legislation protecting domestic screwdriver manufacturers prohibits the sale of flat-blade screw driver tips for power drills.
A vapor barrier should be installed between loose-fill insulation and the finished ceiling _____
a. to keep the fill from settling b. to prevent moisture from penetrating the insulation c. to discourage mice from nesting in the fill d. to prevent moisture from penetrating the finished ceiling
A(n) ____ multivibrator is one type of free-running multivibrator. Its output is rectangular.
A. blocking oscillator B. astable C. Butler oscillator D. Pierce oscillator