The ____, a cylinder-shaped piston assembly component, is used to link the connecting rod to the piston.

a. lock pin
b. knuckle pin
c. wrist pin
d. grunt pin


c. wrist pin

Trades & Technology

You might also like to view...

A welding process reference stud weld (sw) is included in the ____________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Name three problems of interiorscaping

What will be an ideal response?

Trades & Technology

Answer the following with regard to the TTT diagram of a steel of eutectoid composition, shown in Fig. 18.13, and assumed that the specimens involved in the various cooling paths were cut from a thin sheet and austenitized at 750°C before cooling. Describe the microstructure resulting from being:

(a) Cooled to room temperature in less than 1 second. (b) Cooled to 160°C in less than 1 second, and then maintained at this temperature for several years. (c) Quenched to 650°C, and held at this temperature for 1 day, then quenched to room temperature.

Trades & Technology

Table eggs are not fertile.

Answer the following statement true (T) or false (F)

Trades & Technology