Describe how a 4 AWG or larger wire is identified as a grounded conductor.
Fill in the blank(s) with the appropriate word(s).
It can be white or gray in color, or have three white stripes along its entire length.
It can also be reidentified by applying white tape at all termination points. The tape must completely encircle the wire in order to be clearly visible.
You might also like to view...
What size resistor is typically used as an EOL resistor?
A. 1000 ohm B. 4700 ohm C. 6800 ohm D. 10 Kohm
Zero emission vehicles (ZEV) _______
A) Produce zero tailpipe emissions B) Are either electric or fuel cell powered C) Both A and B D) Neither A nor B
Select the statement below that is the definition of a peak percentage overshoot response curve
A) Each successive peak of the ringing output is 25 percent of the previous. B) The maximum peak overshoot is a percentage of the step change. C) Minimum damping that produces the best rise time and no overshoot. D) The area between the ideal response and the actual response is made as small as possible. E) Correct statement not provided
What should be done before forcing a caliper piston back into its bore while servicing hydraulic disc brakes?
A. open the bleed nut and drain the displaced fluid B. open the master cylinder lid to allow the fluid to return to the reservoir C. either A or B D. neither A nor B