When the print is in metric, the surface roughness is measured in:
a. thousandths of an inch
b. micrometers
c. microinches
d. ten-thousandths of an inch
b. micrometers
You might also like to view...
The oxygen equivalence number of a weld is a number that can be used to predict properties such as hardness, strength, and ductility. The article “Advances in Oxygen Equivalence Equations for Predicting the Properties of Titanium Welds” presents several equations for computing the oxygen equivalence number of a weld. One equation, designed to predict the hardness of a weld, is X=O+2N+(2/3)C, where X is the oxygen equivalence, and O, N, and C are the amounts of oxygen, nitrogen, and carbon, respectively, in weight percent, in the weld. Suppose that for welds of a certain type,
a. Find .
b. Suppose the weight percents of O, N, and C are independent. Find .
The digestive system begins with the ____________________
Fill in the blank(s) with the appropriate word(s).
When checking for proper oil level of a typical manual transmission you will:
a. remove the drain plug and measure the oil that drains out b. remove the level plug and see if it is at the bottom of the hole c. remove the level plug and see if it is within an inch of the bottom of the hole d. remove the dipstick and see if it's in the cross hatch area
Describe Newton's First Law of Motion.
What will be an ideal response?