Systems installed to protect loads such as communications, ventilation, or lighting systems that, when stopped, could create hazards or hamper rescue or fire-fighting operations are known as _____.

a. emergency systems
b. legally required standby systems
c. life safety systems
d. essential systems


b. legally required standby systems

Trades & Technology

You might also like to view...

The purpose of checking is to ____.

A. identify and correct all mistakes B. verify that all revisions have been completed C. improve the drawings by suggesting new revisions D. review and grant final approval of the drawings

Trades & Technology

What maintenance should be performed to a power antenna to help keep it working correctly?

A) Disassemble the mast and pack the mast with silicone grease (or equal) B) Loosen and then retighten the retaining nut C) Clean the mast with a soft cloth and lubricate with light oil D) Remove it from the vehicle and lubricate the gears and cable

Trades & Technology

Two technicians are discussing a no-start (no-spark) condition. Technician A says that an open pickup coil could be the cause. Technician B says that a defective ignition control module (ICM) could be the cause. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

Which of the following statements regarding standardization is true?

I. All products made to a given specification will be interchangeable. II. A range of standard specifications can be established so that the range covers the majority of uses for the item. III. Standardization results in a larger variety of parts. A) II and III are true. B) I and II are true. C) I and III are true. D) I, II and III are true. E) None of the above is true.

Trades & Technology