Technician A says springs should be tested for squareness, tension, and height. Technician B says to stack VSI shims under a valve spring until the spring pressure is correct. Who is correct?
A. Technician A
B. Technician B
C. Both technicians
D. Neither technician
Answer: A
You might also like to view...
Two common methods used to control the voltage applied to the motor are autotransformer control and ____.
a. triac control b. parallel impedance c. steps speed control d. diac control
The size of the ____ opening (RO), or opening in the framing, is listed on the door and window manufacturers' specifications.
A. rough B. rigid C. required D. recommended
Clutch modulation is:
a. the time it takes to change speed ranges b. the rate of pressure rise for clutch application c. the modification of forward and reverse clutches when engaged d. the maximum pressure applied to the clutches
If the brakes require more pedal effort when stopping and the booster is okay, the problem may be caused by:
A. a sluggish caliper piston. B. a sticking caliper piston. C. a loose caliper piston. D. both A and B.