Explain what the minor and major thrust sides of the piston are.
What will be an ideal response?
The minor thrust surface is the area of the piston skirt that contacts the cylinder wall during the compression stroke. When the big end of the connecting rod is rotated to one side of the engine at this time, the minor thrust surface is on the opposite end. The major thrust surface area is the area of the piston skirt that contacts the cylinder wall during the power stroke. When the big end of the connecting rod is rotated to one side of the engine at this time, the major thrust area is on the opposite end.
You might also like to view...
For many years, valves from the hearts of ____________________ have been used to replace human heart valves
Fill in the blank(s) with correct word
Technician A says Chrysler OBD-I (1981-1995 ) vehicles were equipped with a BUS system called Serial Communications Interface (SCI). Technician B says The Chrysler Programmable Controller Interface (PCI) is a three-wire communication protocol that connects at the OBD-II DLC at terminal 2. Who is right?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The subsequent problems deal with the partial quadrature decoder circuit below:
If B goes from LO to HI while A is HI, the value on the CCW line will
A. not change in any case B. stay at or become LO C. stay at or become HI D. experience a full pulse
Vic purchased a 100,000-kernel bag of seed corn for $244. He planted 25,800 kernels of corn per acre. Estimate his cost per acre.
What will be an ideal response?