You are using VMware Workstation 12 Pro and are currently on the "Select I/O Controller Types" window. What are your choices for configuration of the adapter in this window?
What will be an ideal response?
This window allows you to change the I/O adapter type for any virtual SCSI adapters you will use in the virtual machine. The IDE adapter is limited to the ATAPI adapter type, but you can select Bus Logic or LSI Logic for the SCSI adapter. You should select an adapter type based on the requirements of the guest OS you will be installing. VMware Workstation 12 Pro offers an LSI Logic SAS mode (default for Windows 10), which uses a serial interface; previous SCSI modes used parallel interfaces.
You might also like to view...
Match each item with a statement below.
A. Uses UDP datagrams and eliminates the session overhead B. Associates the protocol (Internet), the IP address (ANY) and the specific port number (7500) with a socket C. An input/output mechanism for network messages D. Requires a session to be established between the client and server E. Are required to use well-known port numbers on a server
Which of the following terms refer to an operation that the processor manages, one example of which is sending data to the printer as shown in the accompanying figure?
A. buffer B. spool C. task D. event
Internet-working devices operate at OSI layer:
A. 2 B. 3 C. 4 D. 5
A _____ allows you to move directly to specific slides rather than proceeding through the presentation sequentially.
Fill in the blank(s) with correct word.