If different profile tolerances are required on different segments of a surface, reference numbers are used to identify the extent of the extremities.
Answer the following statement true (T) or false (F)
False
You might also like to view...
What are the eight color variations of ferrets?
What will be an ideal response?
An on-line manufacturing work cell performs a series of four quality control tests on a manufactured product. Design a logic system that will simultaneously examine the results of all four tests and decide into which of the three output containers the piece will drop. A, B, C, and D are identified as four tests or inputs to the logic system. Bins #1, #2, and #3 are classified as outputs. If the product passes two OR three tests, Bin #1 will receive the part. If it passes one of the tests, Bin #2 will be open. Bin #3 accepts perfect units only.
What will be an ideal response?
Draw the shear and moment curves for the beam in Figure P5.26. Sketch the deflected shape.
The backing plate should be replaced if the shoe contact areas (pads or ledges) are worn more than ________
A) 1/4 in. (7 mm) B) 1/8 in. (4 mm) C) 1/2 in. (13 mm) D) 1/16 in. (2 mm)