In a flooded chiller:
A) The water and refrigerant are mixed in the shell.
B) The water and refrigerant are in separate tubes with a heat transfer medium in the shell.
C) The water is in the tubes and the refrigerant is in the shell.
D) The water is in the shell and the refrigerant is in the tubes.
C
You might also like to view...
Which factor will not increase the load's leverage?
a. Booming down b. Booming up c. Telescoping out d. Adding weight to the load
Barbara had a pond dug with the outside of the dam making an angle of 30° with the horizontal. The dam is 12 feet high (Figure 3-7).
a. What is the slope of the outside of the dam?
b. How long is the dam in feet?
Loads are calculated using a system known as Manual ____, created by ACCA.
A. D B. J C. S D. T
What level of tach reference information is required in order for the PCM to properly control an SFI fuel management system?
A. Level one information indicating that "a pair of cylinders`pistons is approaching TDC" B. Level two information indicating "which pair of cylinders`pistons is approaching TDC" C. Level three information indicating "which cylinder of the piston pair approaching TDC is on the compression stroke" D. None of this information is required in order for the PCM to control a SFI fuel management system.