What is the major thrust of 29 CFR 1926: Subpart A?
What will be an ideal response?
29 CFR 1926 is the OSHA standard that applies specifically to construction. It is divided into subparts numbered from A to Z. Each subpart covers a specific area of concern. Subpart A covers purpose, scope, variances from safety and health standards, and enforcement of the standards. A major focus of this subpart is the right of the U.S. Secretary of Labor or the designated representative of the Secretary to enter any jobsite that falls under the jurisdiction of the Contract Work Hours and Safety Standards Acts (Section 107). The principal message contained in this subpart is that the Secretary has the right to conduct on-site inspections to determine if a construction company is complying with applicable standards. There is also a detailed explanation of the rules governing administrative adjudication of cases when violations are noted by an inspector in the process of enforcing the OSHA standards. Subpart A contains the following sections:
• 1926.1 Purpose and scope
• 1926.2 Variations from safety and health standards
• 1926.3 Inspections – right of entry
• 1926.4 Rule of practice for administrative adjudication's for enforcement of safety and health standards
You might also like to view...
Refer to the accompanying figure. When starting the DC motor, as the ____________________ builds across the armature, it acts like a resistor that drops a larger percentage of the applied voltage, thus providing a voltage drop for the A coil and the A contacts 3–4 close to bypass current around the starting resistor.
Fill in the blank(s) with the appropriate word(s).
Potential energy is the attractive force that all objects in the universe have toward one another
Indicate whether the statement is true or false.Common components of soilless media are peat, sand, and _____
a. pine bark c. wood shavings b. pine needles d. dirt
Usually the computer will control an actuator by the use of low-side drivers that complete the output device's path to ground through a MOV.
Answer the following statement true (T) or false (F)