What is one of the highest risks in the operation of reactors?
a. Leaks
b. Runaway reactions
c. Loss of cooling system
d. Loss of heating system
a. Incorrect. One of the highest risks in the operation of a reactor is a runaway reaction.
b. Correct. One of the highest risks in the operation of a reactor is a runaway reaction.
c. Incorrect. One of the highest risks in the operation of a reactor is a runaway reaction.
d. Incorrect. One of the highest risks in the operation of a reactor is a runaway reaction.
You might also like to view...
What state produces almost half of the vegetables grown in the United States?
What will be an ideal response?
When a DMM is used to measure resistance, which of the following should be true?
A. circuit energized, leads in parallel B. circuit energized, lead in series C. circuit open, leads in parallel D. circuit open, red lead in mA socket
During a right turn, what causes the power steering pump to force fluid into the right side of the rack chamber, and allow fluid to be removed from the left side of this chamber?
What will be an ideal response?
What is the major difference between SRAM and DRAM?
A) Dynamic RAMs are always active; Static RAMs must rest between data read/write cycles. B) The only difference is the terminal from which the data is removed: from the FET Drain or Source. C) DRAMs must be periodically refreshed. D) SRAMs can hold data via a static charge, even with power off.