Given diameters +/- tolerances of 0.9323 +/- 0.003 inches and 1.002 +/- 0.003 inches, what is the minimum clearance?
What will be an ideal response?
0.9323 + 0.003 = 0.9353 inches1.002 - 0.003 = 0.999 inchesminimum clearance = 0.999 - 0.9353 = 0.0637 inches
You might also like to view...
Plywood panels are made by gluing, under heat and pressure, layers of
A) wood veneers so that the wood grains in adjacent layers are perpendicular to each other. B) shredded wood strands so that the strands in adjacent layers are perpendicular to each other. C) wood veneers so that the wood grain in all layers is in the same direction. D) shredded wood strands so that the strands in all layers are in the same direction.
About ___________ workers has a problem with drug or alcohol abuse.
Fill in the blank(s) with the appropriate word(s).
Technician A says that each coil spring is specifically engineered to be installed on one particular side of the vehicle. Technician B says that rubber spring pockets prevent excessive noise. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
When using the closed-valley flashing method, the final underlayment across the valley flashing shall be lapped at least ________ inches
A) 18 B) 24 C) 16 D) 30