Using the finite-difference method and all backward differences, design digital filters to approximate analog filters with these transfer functions. In each case, if a sampling frequency is not specified choose a sampling frequency that is 10 times the magnitude of the distance of the farthest pole or zero from the origin of the “s” plane. Graphically compare the step responses of the digital and analog filters.
You might also like to view...
A good reading for a cylinder leakage test would be ________
A) Within 20% between cylinders B) All cylinders below 20% leakage C) All cylinders above 70% leakage and within 7% of each other D) All cylinders above 20% leakage
Plats also typically show a Delta angle for curves, which is represented by the symbol D. The Delta angle is the included angle of the curve. Define included angle.
What will be an ideal response?
A thermometer registered 85 degrees F, but the actual temperature was 90 degrees F. The percent error to the nearest tenth is ____________________%
Fill in the blank(s) with the appropriate word(s).
Use of the 100' tap rule is limited to installation in high-bay manufacturing buildings with wall heights over _____.
a. 15 feet b. 20 feet c. 35 feet d. 40 feet