List the step-by-step process for lockout.
What will be an ideal response?
? Notify affected individuals you are about to shut the machine down. This
includes operators, employees nearby, and management.
? Stop the machine cycle, if necessary.
? Turn off or remove all external power supplies and lock them in the off
position using lockout devices and a lock with your name on it.
? Place appropriate information tags on the equipment, such as “Do Not
Run, Under Maintenance”
? Verify zero energy state. Make sure to account for capacitors, compressed
springs, items that could fall, stored fluid pressures, or other potential
energy sources.
? Perform repairs.
? Once finished, remove all tools and any blocking devices or other items
you added to the machine for safety reasons.
? Once everything is clear, each person working on the robot removes his or
her own lock and the last person can return power to the equipment.
You might also like to view...
Two common pressure sensing devices used in pressure controls are:
A) Capacitive transducer and thermistor. B) The bellows and the diaphragm. C) Strain gauge and expansion tube. D) Sail switch and warp switch.
To receive an injury due to an electrical arc flash, the technician:
A) Must complete a circuit with their body. B) Only needs to be standing in the vicinity of the arc flash. C) Must be unusually susceptible to electronic auras. D) Must touch an energized electrical source.
Which of the following states will refrigerant not be in as it flows through the evaporator?
A. Superheated refrigerant vapor B. Saturated liquid C. Sub cooled liquid D. Superheated liquid
The ____ is the base of the foundation system and is used to displace the building loads over the soil.
A. veneer B. footing C. grade beam D. anchor bolt