Where are electrode markings placed?
What will be an ideal response?
Electrode markings are placed on the exposed end of the metal rod, the exposed surface of the metal
rod, and the flux near the exposed rod.
You might also like to view...
Technician A says cylinder taper wear causes changes the end gaps of the piston rings to change. Technician B says if there is too much taper wear, out-of-round wear occurs. Who is right?
A. Technician A B. Technician B C. Both technicians D. Neither technician
Edge forms made of flexible plastic can be curved to a radius of as little as _____.
a. 1 foot b. 2 feet c. 3 feet d. 4 feet
Forward/reverse shuttled transmissions allow for faster cycle times between loads in a loader or bulldozer application.
Answer the following statement true (T) or false (F)
The fan and limit switch in the gas furnace control ________
A) the temperature at which the fan turns on and the temperature at which the air conditioner turns off B) the temperature at which the fan turns on and the temperature at which the gas is ignited C) the temperature at which the fan turns on and the maximum temperature the furnace can reach before power to the gas valve is turned off