The purpose of the compressor clutch is:
A. To allow the compressor to change gears more easily.
B. To assist in matching the speed of the compressor to the engine crankshaft.
C. To control the operation of the compressor on or off.
D. To prevent shock loading the compressor drive pulley.
Answer: C
You might also like to view...
?When waste spark ignition is used on an engine, when is the waste spark delivered to the engine cylinder?
A. ?Piston at TDC on compression stroke B. ?Piston at TDC on exhaust stroke C. ?Piston at BDC on power stroke D. ?Piston at BDC on intake stroke
Name the American Society of Mechanical Engineers document that governs sectioning techniques, and the ASME standard that covers the principles of drawing recommended cutting plane and section lines.
What will be an ideal response?
A technician is watching the battery voltage during cranking using a scan tool. What would be a normal reading?
A) 12 to 13 volts B) 13.5 to 15.0 volts C) Less than 9.6 volts D) 10.5 to 11.5 volts
On an ellipse, the foci are:
A. the center points for the major axis B. the center points for the minor axis C. the center point of the ellipse D. one-half the distance of the minor and major axis