When the outputs of several open-collector TTL gates are connected together, the gate outputs

A) produce more voltage. B) are ANDed together.
C) produce more fan-out. D) usually burn out.


B

Trades & Technology

You might also like to view...

Mum media is available in soilless culture. The water being applied to the media should be tested for a pH value of _____

A) 5.5 to 5.8 B) 5.9 to 6.2 C) 6.3 to 6.5 D) above 6.5

Trades & Technology

What is the maximum level of the normal CO range?

A) 10 ppm B) 36 ppm C) 1 ppm D) 9 ppm

Trades & Technology

If the tungsten electrode touches the filler metal during welding, the welder must _____

A) touch the electrode to the weld puddle B) increase the push angle C) discard the electrode D) remove and clean the electrode

Trades & Technology

Technician A says that pick hammers and pick tools cause corrosion hot spots that must be repaired with corrosion protection. Technician B says that pulling tools are often used when two-sided access is not possible. Who is correct?

A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B

Trades & Technology