The width of a groove made by a cutter of a given width:
A) Slightly narrower than the cutter B) Is always exactly the same as the cutter width
C) Depends on the diameter of the cutter D) Is often wider than the cutter
D
You might also like to view...
The dimensions of keys and keyways are determined in relation to the diameter of the shafts with which they are used. 
, where D = shaft diameter, L = key length, and T = key thickness. What is the shaft diameter in inches that would be used with a key where L = 4.80 inches and T = 0.49 inches?
What will be an ideal response?
What is the best way to tell if a disposable refrigerant cylinder is equipped with a dip tube?
a. Crack the valve to see what comes out b. Determine if it is an HFC or an HCFC c. Determine if it is azeotropic or near-azeotropic d. Check the cylinder labeling
The flywheel for the engine consists of the flexplate and the torque converter.
Answer the following statement true (T) or false (F)
Fuel injection service is being discussed. Technician A says that the throttle plate(s) should be cleaned. Technician B says that the fuel rail should be cleaned. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician