Explain why an owner might not want to be involved in a broker construction contract?
What will be an ideal response?
An owner may not want to be involved in a broker construction contract because they allow brokers to subcontract all of the work and the broker is not required to perform any of the work.
You might also like to view...
In a plywood panel, the grain direction in adjacent veneers is at right angles to each other, referred to as cross-graining of veneers. Cross-graining equalizes the panel strength in the two principal directions of the panel. Does it mean that a plywood panel (typical size is 4 ft × 8 ft) is equal in strength in its long and short directions?
What will be an ideal response?
When an OSHA-required safety device fails during a lift, the operator is directed to _____.
a. continue until the lift is complete b. release the host reeving c. bring the operation to a safe halt d. lower the boom to a horizontal position
What maintenance does an electronic air cleaner require?
A) Periodically cleaning the ionized plates B) Annual replacement of the electrostatic precipitation unit C) Very little maintenance is required because the plates burn up the contaminants. D) Periodically replacing the ionized plates
A mechanic cuts 15 bushings from a piece of stock. Each bushing is 3/8 inch long. Not allowing for saw cuts, what is the total length used in inches?
A. 5 B. 5 5/8 C. 6 D. 6 1/2