Why should wire not be discarded on the floor?
What will be an ideal response?
Do not discard pieces of wire on the floor. They present a hazard to safe movement around the machine. In addition, a small piece of wire can work its way into a filter screen on the welding power source. If the piece of wire shorts out inside the machine, it could become charged with high voltage, which could cause injury or death. Always wind the wire tightly into a ball or cut it into short lengths before discarding it in the proper waste container.
You might also like to view...
The operating temperature within a fixture is a primary factor in the selection of a _____
a. shield drain b. channel wire assembly c. cable d. fixture wire
When spacing groundcover plants, closer spacing will result in more rapid coverage of the area
Indicate whether the statement is true or false
If cell A3 contains the value of 74, and if you were to type the following command in cell B3 =IF(A3>60,"PASS","FAIL"), what would be the result?
a. 74 b. 60 c. PASS d. FAIL
____________________ enable you to determine the type of data needed for input, the processes that must be performed, and the output requirements.
Fill in the blank(s) with the appropriate word(s).