37 + 28 =
A) 515 B) 65 C) 11 D) 55
B
You might also like to view...
A technician is diagnosing a J1939 communication problem. The following measurements were obtained using a DMM voltmeter at the 9-pin diagnostic connector: CAN + to CAN -3VCAN + to ground2.5VCAN - to ground2.5VWhat do these readings indicate?
A. CAN + is not shorted to CAN -. B. CAN + is not shorted to ground. C. CAN - is not shorted to ground. D. All of the above.
The frame or unitized body serves the following purposes, EXCEPT:
A. Allows the vehicle to absorb stress when driving on rough road surfaces B. Allow proper suspension ride height and control suspension travel during driving maneuvers C. Enables the vehicle to absorb torque from the engine and drive train D. Provides attachment points for suspension and other components
A rectifier bridge assembly will only use these semi conductor components:
a. diodes b. transistors c. Zener diodes d. capacitors
What force pushes the electrons through a resistance in a circuit?
A. voltage B. inductance C. potential D. current