At start-up of a(n) ____________________ motor, the repulsion winding predominates; however, as the motor speed increases, the squirrel-cage winding is used most.
Fill in the blank(s) with the appropriate word(s).
repulsion-induction
repulsion induction
You might also like to view...
A ______ attaches to a screed board and works faster than a regular screed board and allows a dryer concrete to be placed and finished.
A. Magnesium straight Darby B. Bon Electric Speedy Screed C. Handicap Ramp Bull Float D. WHA-Lite "Euro" Decker Float
Answer the following statement(s) true (T) or false (F)
1. A network constitutes one rung of a ladder diagram that starts at the right rail and ends at the left rail. 2. The easiest way to avoid nesting is to remember that all branches must start at a common point, and all of the branches must end at the same location. 3. The way the processor scans the program is the same from PLC to PLC. 4. It is common practice to wire the overload contacts to an input module. 5. When a hard-wired backup control circuit is used in conjunction with a PLC to control a motor, then the overload contact on the motor starter must be wired in series with the motor coil to provide protection for the motor under both means of control, PLC and hard-wired.
Joystick steering could use these TWO different ways to control the main steering control valve:
a. Mechanical linkage and pilot oil b. Position sensors and poppet valves c. Mechanical linkage and poppet valves d. Poppet valves and rotary valve
The Associative Property is also known as the Order Property.
Answer the following statement true (T) or false (F)