Postwelding cleanup, grinding, and painting add to the weldment's ____ cost.
A. process
B. material
C. finishing
D. overhead
Answer: C
You might also like to view...
A piston-cylinder device is filled with air. Initially, the piston is stabilized such that the length of the cylinder beneath the piston is 0.15 m. The piston has a diameter of 0.10 m. A weight with mass of 17.5 kg is placed on top of the piston, and the piston moves 0.030 m, such that the new length of the air-filled cylinder beneath the piston is 0.12 m. Determine the work done by the newly-added mass.
Given: x1 = 0.15 m; x2 = 0.12 m; D = 0.10 m; m = 17.5 kg Assume: g = 9.81 m/s2 What will be an ideal response?
?When there is too much valve lash on a mechanically adjusted valvetrain, the lifter or cam follower can miss the _____ ramp.
What will be an ideal response?
When an empty cylinder has been removed from the workstation and stored, it must be marked MT (or the
acceptable site notation for indicating an empty cylinder) _____. a. near its top b. on the middle of its side c. on its bottom d. on its lower third
The transfer of heat through liquids or gases, including smoke, is called
A. Transference B. Conduction C. Ambience D. Convection