If a key is lost and an emergency lockout removal is authorized, _____.
a. written verification is required to indicate that the affected employee was informed of the action
b. the employee is required to make up the down time
c. an OSHA inspector must be called in to sign off on the incident
d. the supervisor must take the affected lock out of service
a. written verification is required to indicate that the affected employee was informed of the action
You might also like to view...
Saturated water with a quality of 0.25 and a temperature of 300°F enters an uninsulated diffuser at a velocity of 510 ft/s. The mass flow rate is 5.2 lbm/s.
(a) If the water is to exit as saturated water vapor at a temperature of 300°F, with a velocity of 25 ft/s, determine the necessary heat transfer rate. (b) Using your model of a diffuser, determine the necessary heat transfer rates for the flow to exit as a saturated substance with qualities ranging from 0.40 to 1.0. (c) Using your model of a diffuser, determine the necessary heat transfer rates for the flow to exit as a saturated vapor at 300°F, with exit velocities ranging from 0 ft/s to 300 ft/s. Given: Water: x1 =0.25; T1 = 300°F; V1 = 510 ft/s; x2 = 1.0; T2 = 300oF; V2 = 25 ft/s;m?=5.2 lbm/s What will be an ideal response?
The term shading means the ______ of coloring, crosshatching, or adding special markings.
Fill in the blank(s) with the appropriate word(s).
Bond beams are measured as "____" the blockwork in which they are required.
A. extra over B. over-under C. in lieu of D. standardized bricks of
How does the addition of a beta stabilizer strengthen titanium?
What will be an ideal response?