A normal operational refrigerant release would be:
A) Venting refrigerant to correct an overcharge.
B) Releasing the charge to change the metering device.
C) Venting the charge to change a compressor.
D) Releases from purge cycle operation.
D
You might also like to view...
Mr. Smiley has 8.2 acres of tobacco on his farm. He has set 121/ /2 percent of the crop. What fractional part of the crop has he set?
What will be an ideal response?
All of the following statements are true EXCEPT:
A. acceptable leakage from bearings can be from 300 to 600 drops in a minute. B. the supply of oil in the primer tank should be enough to fill the new oil filter as well as the oil lines in the block. C. when oil is apparent at some of the rocker arms, the lubrication system is primed and the valve covers can be installed. D. some pumps (the internal/external in particular) are not self-priming and must be filled with assembly lube before installation.
If a 100-watt light remains on for 12 hours, how many kilowatt-hours of power will be consumed?
a. 1.2 kWh b. 8.3 kWh c. 12 kWh d. 100 kWh
A fluorescent leak detector will only work after a special dye is injected into the system.
Answer the following statement true (T) or false (F)