The disconnect switch for the unit:
A) Can be the breaker in the power distribution panel feeding the furnace circuit.
B) Should be located within sight of the furnace.
C) Should be attached to the furnace cabinet.
D) Should be located in an easily accessible location, like a utility closet or garage.
B
You might also like to view...
All of the following statements are true EXCEPT:
A. it is sometimes necessary to remove exhaust pipes before the transmission can be removed. B. before the transmission can be removed, the driveshaft must be removed. C. on an RWD vehicle, to gain easier access to the nuts that hold a shifter handle in place, remove the cross-member bolts. D. sometimes heat is needed to expand a gear during disassembly or reassembly. The tool of choice for this is a torch rather than a heat gun, which can damage a gear if it is overheated.
There is a special sale on engine oil. If you purchase more than one 12-quart case, you will receive a 5 percent discount. If you purchase six or more cases, you will receive a 10 percent discount. You have two vehicles that require an oil change every 4,000 miles. Vehicle #1 requires eight quarts per oil change plus one additional quart when you also change the oil filter. Vehicle #2 requires five quarts per change plus one quart whenever the filter is changed. Each year your family drives vehicle #1 about 16,000 miles and vehicle #2 about 32,000 miles. You change the oil filter every other time the oil is changed. The normal price for oil is $22.99 per case. Oil filters cost $4.99 each. How much will a one-year supply of oil cost for both vehicles?
Fill in the blank(s) with the appropriate word(s).
________ the time base setting reduces the number of samples per second
A) Dividing B) Increasing C) Decreasing D) None of these
How are the inner tie rods attached to the rack on a center take-off type rack and pinion steering gear?
A) Bolted B) Pinned C) Staked D) Riveted