What is the pressure at the bottom of a water tank that has a cross section of 10 ft2 and is filled with water to a depth of 40 ft?
A) 40 ft × 0.433 lb/ft = 17 psi (rounded) B) 40 ft × 0.433 lb/ft × 10 ft2 = 170 psi (rounded)
C) (40 ft × 10 ft2)/0.433 = 924 psi (rounded) D) (40 ft × 0.433 lb/ft)/10 ft2 = 1.7 psi (rounded)
A
You might also like to view...
The part that is MOST-Likely used to prevent the front brakes from applying until the rear drum brake shoes overcome return spring pressure and contact the brake drums is the:
A. metering valve B. master cylinder C. piston D. proportioning valve
Technician A says that an advantage of CR-EHIs is that they are less susceptible to problems caused by contaminated fuel than other types of fuel injector. Technician B says that when a CR-EHI fails due to contaminated fuel, the problem can be usually rectified by disassembly, cleaning, and reassembly. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
The positive side of a circuit usually uses what type of a connector, according to the text?
A) Male B) Female C) Both A and B D) Neither A nor B
The bottom view usually shows the most hidden features.
Answer the following statement true (T) or false (F)