When required to make butt connections on multiple wires within a harness, what should be done to avoid a bulge at the connection junctions?
A. use aluminum crimp connectors
B. hammer the connections flat
C. stagger the butt joints
D. use high tension shrink wrap
Answer: C
You might also like to view...
To understand how auxiliary views are created, it is useful once again to think about the object as if it were surrounded by a(n) _________________________.
Fill in the blank(s) with the appropriate word(s).
Suppose leaves containing 1000 kg of carbon fell to the forest floor in a humid temperate environment. After a year or so, how many kg of that carbon would you expect to remain in the soil as microbial biomass and humus?
A) 20 B) 10 C) 200 D) 400 E) 800
Cross-section leveling determines the intermediate elevations of several points _____
a. perpendicular to the center line b. equally spaced along the center line c. parallel to the center line d. above and below the center line
During the evacuation process, __________of the system should be connected to the vacuum pump.
A. the high-pressure side B. the low-pressure side C. both the high- and low-pressure sides