There are two basic ways a BEV is connected to an external source of electricity for charging: conductive and inductive. What is the difference between the two?
What will be an ideal response?
With a conductive coupling, the coupling is plugged into a receptacle on the vehicle where it connects into the wiring for the batteries. The other end of the coupling is connected to a 110-volt or 220-volt outlet or a battery charger. The other type of coupling is called an inductive coupling. This type of coupling uses a paddle that fits into a socket on the vehicle. Rather than transferring the power by a direct wire connection, power is transferred by induction. This is actually a magnetic coupling between the windings of two separate coils, one in the paddle and the other mounted in the vehicle.
You might also like to view...
Technician A says aluminum structural parts may be 50 percent thicker than those made of steel. Technician B says a cast aluminum part may be drilled and machined to specifications. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B
Strength of the seam-weld is in terms of the shear strength of the weld in ____________________ per millimeter.
Fill in the blank(s) with the appropriate word(s).
Wheel cylinders are being discussed. Technician A says that if a wheel cylinder is not leaking fluid it is OK. Technician B says that wheel cylinders require further inspection. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
What is the working pressure for a low pressure boiler?
What will be an ideal response?