Which of the following is a true statement?
A. The best way to test a gauge is to short the wire at the sending unit to +12V.
B. The output of a vehicle speed sensor is the vehicle speed.
C. A d'Arsonual type gauge would typically be used as an ammeter.
D. All of the above are true statements.
Answer: C
You might also like to view...
The following figure shows the encoder for a 1/2 rate convolutional code. Determine the encoder output produced by the message sequence 1011...
Figure 39-2
When the START button is pushed in the accompanying figure, relay coil CR is energized. This causes all CR contacts to close. Contact CR-1 is a(n) ____________________ used to maintain the circuit to coil CR when the START button is released.
Fill in the blank(s) with the appropriate word(s).
To read a dial caliper, ________ the reading on the dial to the reading on the blade
A) Subtract B) Add C) Multiply D) None of these
Technician A says the parking brake is controlled by a lever. Technician B says a pedal may be used. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician