After a robot crash, you notice that each of the five different programs you load and check has positional issues. The most likely explanation for this is _________.
A. you are running the robot at too slow of a speed
B. the crash has altered the position of one of the robot's axes or the tooling
C. you did not start the robot in the home position
D. you have accidently picked old programs that have issues
Answer: B
You might also like to view...
Which of the following is defined as a reduction in the primary air intake area that reduces the amount of gas being burned and results in a smaller, soft, and lazy flame?
a. overfiring b. underfiring c. spud d. high efficiency
Differentiate between some popular breeds of bee in the United States
What will be an ideal response?
Solve for i? in Fig. 10.73 using mesh analysis.
 FIGURE 1.png)
When the insulation requirements call for a greater depth of loose-fill insulation than the height of the ceiling
joists in an attic will allow, you can provide containment for the loose-fill insulation by _____. a. using soffit baffles to hold the excess insulation in place b. tamping down the insulation and holding it in place with plywood sheathing nailed to the ceiling joists c. laying plastic sheeting over the loose-fill insulation to hold it in place d. installing strike-off boards over the joists