The ____ is made of sheet metal or plastic and is either attached to the pump or remotely located.
A. steering damper
B. fluid reservoir
C. bump steer
D. steering rack
Answer: B
You might also like to view...
Saturated liquid water at 200 kPa enters an insulated mixing chamber at a rate of 15 kg/s. The water is mixed with superheated steam at 200 kPa and 125oC. The combined flow will exit as a saturated mixture at 200 kPa. Using your mixing chamber model to calculate the data, plot the quality of the combined exit flow for superheated steam entrance flow rates ranging from 5 kg/s to 200 kg/s.
State 1: Liquid inlet; State 2: Steam inlet; State 3: Outlet Given: P1 = P2 = P3 = 200 kPa; x1 = 0.0; T2 = 125oC; x3 = 1.0; m?1= 15 kg/s Assume: Q?=0 (insulated). Given no other information regarding the mixing chamber, make the following common assumptions: W?=?KE=?PE=0 Also, assume the mixing chamber is a multiple-inlet, single-outlet, steady-state, steady-flow device.
IPM is a much more sophisticated approach than the control programs of the past, where _________ were the automatic response
A) fires B) trenches C) ?digs D) chemical sprays
What does Newton's third law of motion state?
What will be an ideal response?
Six volt vehicle systems require ________ wires than 12 volt systems
A) Smaller B) Equal C) Larger D) None of these