In certain cases, the function of a part may require locating and orienting a feature size at RFS. If the location and orientation of a hole are being controlled relative to the outside surfaces of the part and a tolerance of position at RFS is applied to the hole, the ____________________must be within its size limits.
Fill in the blank(s) with the appropriate word(s).
ANS: hole
You might also like to view...
Shunt controllers regulate charge current by diverting current away from the ___________ by shorting the charging source output.
Fill in the blank(s) with the appropriate word(s).
The growth of single cells in tissue culture can be used as a source of genetic variability for plant improvement
Indicate whether the statement is true or false
Using the conversion factors between W and Btu/h, m and ft, and K and R, express the Stefan–Boltzmann constant ? = 5.67 × 10?8•W/m2•K4 in the English unit Btu/h•ft2•R4.
What will be an ideal response?
An accessible home has a level site for parking with paved walkways from parking areas to the main entry. Note that a minimum ceiling height of ____ is required for raised-top vans.
A. 30'' (760 mm) B. 48'' (1200 mm) C. 9' (2700 mm) D. 12' (3600 mm)