The intersection of features with circular objects that are projected in multiview to the extent where one shape runs into the other is referred to as:
a. round
b. break corner
c. fillet
d. runout
d. runout
You might also like to view...
What information is included in the "wedding order form"?
What will be an ideal response?
Two technicians are discussing the towing of a four-wheel-drive vehicle. Technician A says that the vehicle should be transported on a flatbed truck to avoid the possibility of doing damage to the drive train. Technician B says that the wheels not lifted off the ground by the tow truck should be placed on a dolly to prevent doing damage to the drive train. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Refrigerant characteristics shown on a pressure-enthalpy diagram include:
A) Molecular weight, valence, specific gravity, and atomic number. B) Pressure, heat, and temperature. C) Molecular weight, specific heat factor, and density. D) Valence, atomic number, and specific volume.
A boring tool that is not centered over the hole being bored:
A) Will cause more bar deflection on the side with the heavier cut B) Will result in uncontrolled vibrations C) Causes more tool wear on one side D) Requires a variable feed rate