Side casings on doors are normally nailed 1/4" back from the edge of the jamb. This distance is referred to as
the _____.
a. reveal
b. margin
c. recess
d. offset
a
You might also like to view...
The high-strength steel cables used in posttensioned concrete construction are called _____.
a. stringers b. bands c. tendons d. stays
The first step in brake drum removal is to ________
A) Mark the drum R or L B) Remove the drum retaining device C) Loosen the parking brake cable D) Remove the master cylinder cover to bleed off hydraulic pressure
Bits used to carry information about a signal, such as error rates, are called:
A) information bits B) overhead bits C) conversion bits D) relative bits E) underneath bits
What is the lower cut off frequency in an RLC resonant circuit if the inductive reactance is 1.2 k?, the resonant frequency is 22 kHz and the resistance is 60 ??
A) 21.8 kHz B) 21.7 kHz C) 20.9 kHz D) 21.5 kHz