In a parallel RL circuit, where one branch contains a resistor and a separate branch contains an inductor, if the inductive voltage is 3V and the resistive voltage is 3V, then the total voltage is ____________________V.
Fill in the blank(s) with the appropriate word(s).
3
three
You might also like to view...
Most framing members in wood light-frame construction are 2-by members. What are the most commonly used sizes for: (i) studs, (ii) floor joists, and (iii) roof rafters?
What will be an ideal response?
Two technicians are discussing the interference angle. Technician A says that it helps a reground valve to seat because it causes increased valve seat pressure. Technician B says that a 10 difference between the valve face and seat angles is enough to cause the valve to leak and burn. Who is right?
A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B
On a water-cooled ice machine, how much water should be draining through the condenser during defrost?
a. 1.5 gpm/ton b. 1.0 gpm/ton c. none
Applying the bend allowance to each bend in the flat pattern ensures that ____.
A. the accurate bend angle will be adequate B. the layout drawings which are required for fabrication and preparation of the part have a comparable bend radius variable to the other parts C. when the material is formed into its final shape, the desired final dimensions can be achieved D. both a and c E. none of the above