In structural steel shop drawings, the view usually drawn as an elevation to show the characteristic shape of a member is called the _______________ view.
Fill in the blank(s) with the appropriate word(s).
In structural steel shop drawings, the view usually drawn as an elevation to show the characteristic shape of a member is called the principal view.
You might also like to view...
What is the minimum efficiency of a fossil fuel–burning furnace?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1.Overhead conductor spans are permitted to be supported by trees. 2.A detached garage supplied with electrical power must always have at least one 125-volt, 15- or 20-ampere receptacle installed in each vehicle bay located not more than ? above the floor and at least one wall switch-controlled lighting outlet. 3.Any 15- or 20-ampere, 125–250 volt receptacle installed in a wet location must have a cover or enclosure that keeps it weatherproof, but only when there isn't anything plugged into it. 4.An overhead garage door is not considered an entrance or exit by the NEC® and therefore does not require a lighting outlet(s) to be installed over or next to it. 5.Incandescent lamps used for lighting in a garage can be replaced with LED lamps.
Angle drilling is done by:
A) A tilting type table or angular vise B) An angle drill press C) An angular workpiece D) Angle iron
A Welder Qualification Test Record (WQTR) informs the inspector that:
A) The filler/base metal is compatible B) The welder is able to deposit sound weld metal C) The procedure is approved D) None of the above