Temporary bracing may become part of the permanent bracing system
Indicate whether the statement is true or false
TRUE
You might also like to view...
In certain cases, surfaces may be located using coordinate tolerances and the form and orientation of the individual surface elements, and in some cases size (i.e., distance between surface elements) controlled using geometric tolerances. This can be accomplished using a coordinate toleranced ____________________ with a dimension origin symbol and a profile of line tolerance applied to the surface elements.
Fill in the blank(s) with the appropriate word(s).
Where is the lowest pressure usually found in a truck cooling system?
A. top radiator tank B. bottom radiator tank C. inlet to the water manifold D. inlet to the water pump
Two technicians are discussing how to loosen bleeder valves. Technician A says that a shock is usually necessary to break the taper at the base of the valve. Technician B says to apply steady, loosening torque to the bleeder valve using a 6-point wrench. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
If there is a 240 V circuit that will be carrying 30 amps using #10 wire size, what is the maximum length of the two wire run that would limit the voltage drop to 3%?
What will be an ideal response?