All of the following statements are true concerning high-voltage system safety, EXCEPT:
A. Test lineman gloves for damage and leaks prior to use.
B. Disconnect the motor generators prior to turning the ignition off.
C. Do not attempt to test or service the system for 5 minutes after the high-voltage service plug is removed.
D. Turn the power switch to the off position prior to performing a resistance check.
Answer: B
You might also like to view...
The ______________________ is nothing more than a large tank that both receives water from the condenser as well as supplying water to the condenser.
Fill in the blank(s) with the appropriate word(s).
Pressure entering the compressor that is too high will cause the density of suction gases entering the compressor to increase.
Answer the following statement true (T) or false (F)
To be successful, set __________ and make specific plans to achieve each one.
Fill in the blank(s) with the appropriate word(s).
Technician A says that an electronic throttle control uses a stepper motor. Technician B says that an electronic throttle control uses a vacuum controlled stepper motor to keep the throttle at a 16%-20% throttle opening. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician