Describe a half-section view.
What will be an ideal response?
In a half-section view, one-half of the object is drawn in section and the other half is drawn as an exterior view. The half section is used principally where both the inside and outside details are symmetrical and where a full section would omit some important details in an exterior view.
You might also like to view...
Technician A says to use two flare nut wrenches to disconnect transmission cooler lines. Technician B says to use vice grip pliers to hold a cooler line that is twisting as the flare nut is turned and then replace the line and fitting. Who is correct?
A. A only C. Both A and B B. B only D. Neither A nor B
A typical nitrogen cylinder is charged to a pressure of roughly _____.
a. 3,500 psig b. 2,000 psig c. 1,000 psig d. 250 psig
The differential cover must be removed before removing the rear axle on which type of axle?
A) Press fit B) Retainer plate C) Welded tube D) C-lock
The ASCII code is an alphanumeric code that has 27 = 128 possible code groups. How many bits are required to accommodate 128 different code groups?
A) 9 B) 6 C) 8 D) 7