_____ synchronizers consist of a hub (called a clutch hub), sleeve, blocking ring, and inserts or spring-and-ball detent devices.
A. Block
B. Disc and plate
C. Plain
D. Pin
Answer: A
You might also like to view...
A heat pump bi-flow filter drier is installed _____.
a. in the vapor line b. in the liquid line c. at the suction service valve d. before the reversing valve
Because it is difficult for most manual welding to work with fractions smaller than ____ of an inch, these smaller dimensions are not commonly used in fabrication. When they are used, it is most often with some form of automated or machine welding or cutting process.
A. 1/16 B. 1/8 C. 1/4 D. 1/2
What should be done first before removing the starter motor from the vehicle?
A) Remove starter solenoid B) Disconnect starter relay C) Remove battery D) Disconnect battery cables
What scale on a psychrometric chart can also be referred to as the sensible heat scale?
a. Wet-bulb b. Enthalpy c. Dry-bulb d. Dew point