What is the purpose of re -learning the PCM/TCM after installing a new or rebuild transmission?
A) Resets the vehicle security system
B) Erases driver personalization memory
C) Causes the TCM to re -set adaptive memory to defaults
D) Calibrates the speedometer settings
C) Causes the TCM to re -set adaptive memory to defaults
You might also like to view...
Solid-state reduced-voltage controllers provide smooth, stepless acceleration of a motor through the use of silicon-controlled _____________________.
Fill in the blank(s) with the appropriate word(s).
The lowest outside air temperature at which the heat pump system can satisfy the heating needs of the structure without requiring auxiliary heat is called the ____________________.
Fill in the blank(s) with the appropriate word(s).
After the oil pan (sump) is removed, the technician should inspect ________
A) The oil pump and pickup screen B) To make certain that all rod and main bearings are numbered or marked C) The valve lifters (tappets) for wear D) Both A and B
This type of axle assembly will use the axle shafts to carry the machines weight as well as transfer torque:
a. full floating b. semi floating c. double reduction d. planetary