Cavitation in a water control valve can be caused by:
A) Installing the control downstream of the coil instead of upstream.
B) Extremely low pressure drop through the valve.
C) Installing the control upstream of the coil instead of downstream.
D) Excessively high pressure drop through the valve.
D
You might also like to view...
When applying a face layer to an office wall in two-ply work, you would most likely use _____.
a. foil-backed drywall b. coreboard c. water-resistant drywall d. 3/8" regular drywall
Find the voltage across the capacitor as a function of time for t > 0 for the circuit in Fig. 16.45. Assume steady-state conditions exist at t = 0-.
 figure 1.png)
The voltage between any leg of a 480 V wye transformer and ground is:
A) 240 V. B) 208 V. C) 277 V. D) 120 V.
Before installing a ceiling, you must reference the MEP drawings to _____
a. make certain that all ceiling penetrations are accounted for b. be sure the room dimensions are correct c. identify the materials required for the installation d. check that construction drawings are the latest version