A truck is placed on alignment turntables with the wheels in the straight ahead position. After removing the pins and zeroing the protractor scales, the wheels are turned all the way left until they contact the turn stop. How will the protractor scale read?
A. right turn angle exceeds the left
B. left turn angle exceeds the right
C. both turn angles should be equal
Answer: B
You might also like to view...
A ____ type of motor shaft is found on very small shaded pole C-frame motors. This type of shaft design is limited to only very low torque requirement applications, because only the friction of the setscrew of the coupling device with the mechanical load is preventing the shaft from slipping.
a. flat b. key c. round d. threaded
Which of the following best describes the type of injectors used with EDC-managed VE injection pumps?
A. poppet B. pintle C. multi-orifii D. electrohydraulic
Which of the following is an INACCURATE statement of what we know about organization change?
a. It can involve virtually anything about an organization. b. Failure to respond to the need for change is a primary reason for organizational failure. c. Change in response to things as they happen is the preferred method of change. d. Most companies have to implement one or more major changes every four to five years. e. Most companies must implement some form of change every year.
In a scaling adder, the ________
A) input resistors are all different values B) input resistors are all the same value C) input resistors have values depending on the assigned weight of each input D) ratio RF/RIN must be the same for each input