Websites typically only have one goal.
Answer the following statement true (T) or false (F)
False
You might also like to view...
In an adiabatic process:
A. the energy absorbed as heat equals the work done by the system on its environment B. the energy absorbed as heat equals the work done by the environment on the system C. the absorbed as heat equals the change in internal energy D. the work done by the environment on the system equals the change in internal energy E. the work done by the system on its environment equals to the change in internal energy
A parachutist of mass 50.0 kg jumps out of an airplane at a height of 1 040 m. The parachute deploys, and she lands on the ground with a speed of 4.0 m /s. How much energy was lost to air friction during this jump?
a. 4.0E+2 J b. 8.2E+4 J c. 4.3E+5 J d. 5.1E+5 J e. 6.4E+5 J
Computer simulations of the early universe clearly show the process of ________ of smaller galaxies into larger ones
Fill in the blank(s) with correct word
Consider a band-saw blade that is to cut steel bar stock. The blade thickness is 2 mm, its height is 20 mm, and it has penetrated the steel workpiece to a depth of 5 mm (see the accompanying sketch). Exposed surfaces of the blade are cooled by an ambient temperature of 20°C through a convection coefficient of 40 W/(m2K). Thermal conductivity of the blade steel is 30 W/(mK). Energy dissipated by the cutting process supplies a heat flux of 104 W/m2 to the surfaces of the blade that are in contact with the workpiece. Assuming two-dimensional, steady conduction, determine the maximum and minimum temperature in the blade cross section. Use a node spacing of 0.5 mm horizontally and 2 mm vertically.
GIVEN
Band saw blade cutting steel bar stock
FIND
(a) Maximum and minimum temperatures in the blade cross section
SKETCH