Describe the steps involved in diagnosing a potential parking brake problem on manually applied systems.
What will be an ideal response?
Checking the service brake pedal travel is the first step in diagnosing a potential parkingbrake problem on manually applied systems. The next step is to inspect and test theparking brake control and the linkage. Finally, a performance test will verify that the parkingbrake can hold the vehicle stationary as required by motor vehicle safety standards.Electrical and electronic systems have modules that monitor and control system operationand operate on the vehicle's controller area network (CAN). These systems have their own unique trouble codes and system procedures.
You might also like to view...
Cuando se aísla tubería con una temperatura inferior a la del ambiente _____.
a. no es necesario colocar revestimiento b. se debe usar sólo ASJ con traslapo autoadhesivo c. es necesario colocar una barrera de vapor en todas las penetraciones d. no se debe usar revestimiento ASJ
When welding in the overhead position, spatter may fall into or on the nozzle and contact tube, which may ____.
A. cause the nozzle to explode B. cause the contact tube to spark C. cause the contact tube to short out to the gas nozzle D. create extra spatter
One advantage of using a digital pressure gauge to test hydraulic systems is:
a. They can withstand higher pressures b. There is no high pressure oil in the hand held display c. They can read quickly fluctuating pressures d. They are cheaper than analog gauges
Explain how a number of holes can be equally spaced on a circle.
What will be an ideal response?