Typical maximum rotor runout specifications are ________
A) 0.003 to 0.005 in. (0.08 to 0.13 mm) B) 0.0003 to 0.0005 in. (0.008 to 0.013 mm)
C) 0.030 to 0.050 in. (0.8 to 1.3 mm) D) 0.300 to 0.500 in. (8.0 to 13 mm)
A
You might also like to view...
____________________ is the transition between shift points.
Fill in the blank(s) with the appropriate word(s).
For the arch shown in Figure P6.20, the thrust force exceeded the abutment’s lateral support capacity, which is represented by a roller at C. Load P was removed temporarily and tension rod AC was added. If the maximum compression in members AB and BC will be 750 kips, what size diameter tension rod is required? (Ignore dead load of the arch.) The allowable tensile capacity of the rod is 32 ksi. Determine the reactions.
On the engineers scale each inch is divided into _____ equal parts.
Fill in the blank(s) with the appropriate word(s).
What can be done to prevent air from getting trapped in the cooling system when the coolant is replaced?
A) Pour the coolant into the radiator slowly. B) Use a coolant exchange machine that draws a vacuum on the system. C) Open the air bleeder valves while adding coolant. D) Either B or C