Technician A says that most active headlight systems will set DTCs if a fault is detected. Technician B says if scan tool activation tests of the active headlight system fails to initiate motor movement, the fault is with an input sensor. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technician A and B
D. Neither Technician A nor B
Answer: A
You might also like to view...
When used in a dehumidification application, the purpose of a heat pipe heat exchanger includes _____.
a. removing latent heat from the air supply b. pre-cooling the air entering the evaporator c. preheating the air entering the evaporator d. providing emergency heat if the compressor fails
The positive lead of a diode is called the ___________
A) Anode B) Emitter C) Cathode D) None of these
The function of a thermocouple in a gas valve is to _____
a. ignite the fuel when the gas valve opens b. turn the pilot off when the thermostat is satisfied c. convert heat from the pilot into an electric current d. sense the flame of the main burner
When a cutting fluid becomes rancid and has a bad odor, what should be done?
A) Avoid contact with rancid fluid when using the machine B) Chemicals should be added to cover up the odor C) The old fluid should be replaced and the tank cleaned D) The operator should wear a respirator